Here you can find the latest Downloads available for your device – including Android TV Box Firmware/Software/Launchers/ROMs, to KODI Apps/APKs & tools.

NameInfoRelease DateDownload Link
XMedia Center 16.7 AML SSL SuperMax MODXMedia Center KODI 16/17 merged optimum performance for AMLOGIC TV Boxes (works on all devices, including Android 4.4 – such as MINIX Neo X8-H Plus, MINIX U9-H, etc). If you are not sure which version to download – download this one.

More info available here

27/06/2017http://supermaxwizard.com/go/aml.apk
XMedia Center 16.7 RK SSL SuperMax MODXMedia Center KODI 16/17 merged optimum performance for RockChip compatible TV Boxes (must be a RockChip TV Box running Android Lollipop or higher, such as XMEDEX XTREME, or TANIX TX2, etc.)

More info available here

27/06/2017http://supermaxwizard.com/go/xmc.apk
XMedia Center 16.7 Intel SSL SuperMax MODXMedia Center KODI 16/17 merged optimum performance for INTEL TV Boxes (must be a TV Box which is using an INTEL processor – such as the MINIX Z64, Wintel W8, etc.)

More info available here

27/06/2017http://supermaxwizard.com/go/intel.apk
SPMC 16.7.4 (KODI for NVIDIA Shield)The latest and final release of SPMC – which is a KODI fork by the ex-KODI Android developer (developed for NVIDIA Shield TV).

Not for DROIDWORLD Android TV Boxes!

26/02/2018https://github.com/koying/SPMC/releases/download/16.7.4-spmc/SPMC-16.7.4-spmc-94d913d-armeabi-v7a.apk

The firmware updates listed below were developed by DROIDWORLD (via original or custom firmwares) – you can expect optimum performance & networking tweaks. DROIDWORLD develops firmware updates when the manufacturer/original firmware is not up to scratch, has bad performance, bugs – and especially when there are network/connectivity/ WiFi issues. There are cases where a device has a good WiFi chipset, but the firmware of the device causes very bad speeds or low signals. We optimize the network to ensure optimum performance, with full compatibility on Australian WiFi Channels. We also develop firmware updates (when possible) in cases where the manufacturer does not update the Android version, while the update is necessary for the customer (such as the MINIX NEO X8-H Plus).

NameInfoRelease Date
Download Link
MINIX Neo X8-H Plus Android Lollipop 5.1.1Update your old MINIX Neo X8-H Plus from Android 4.4 KitKat to Android 5.1.1 Lollipop – making it fully compatible with KODI 17 +. This is a fully functional firmware which keeps your AirPIN-PRO license intact (iPhone mirroring/sharing), aswell as full support for your NEO A2 / A3 Lite Remote Controllers.

NOTE: After flashing the image, please boot into android recovery mode, and wipe the “dalvik cache” or “cache partition” – otherwise it may be buggy.

Disclaimer: Modification or re-distribution of this image without authorization from DROIDWORLD is prohibited.

Service: If you own this device and wish to upgrade its firmware, but do not know how to do so – please note that we do offer services for upgrading firmware/refurbishment of any android tv box purchased from any retailer.

Terms of Use: Firmware images need to be flashed onto your device via USB/PC. Do so at your own risk. Flashing the wrong image, or flashing the correct image in an incorrect manner can cause your device to “brick”. We only recommend experienced users to perform firmware upgrades. We take no responsibility and provide the firmware files ‘as is’ without warranty. We do not provide flashing upgrade support or troubleshooting for DIY users > we do however provide a service to do it for you.

*Credit goes to Finless from Freaktab for making this firmware ROM update possible.

21/04/2018Download MINIX Neo X8-H Plus Lollipop 5.1.1 img
QBox Android Lollipop 5.1.1 (DROIDWORLD Q-TV) S905 16GB AP6330This QBOX firmware will work on any Amlogic QBOX S905 with AP6330 WiFi Chip. (Broadcomm Dual Band 5G).

Build ID: p200_2G / LMY47V / AP6330

NOTE: There are 3 variants of the QBOX S905 (this firmware is for the one with AP6330 WiFi chip. If you flash this firmware on a different variant, the WiFi / BT will not work).

NOTE: This is for QBOX S905 , and NOT S905X. The new QBOX’s are sold with the lower cost S905X CPU, this firmware is for the original QBOX with the S905 CPU.

NOTE: Since the QBOX was sold with different remote controls, your original IR based remote control may not work with this firmware. Although you can use any aftermarket wireless android remote control on this device.

Disclaimer: Modification or re-distribution of this image without authorization from DROIDWORLD is prohibited.

Service: If you own this device and wish to upgrade its firmware, but do not know how to do so – please note that we do offer services for upgrading firmware/refurbishment of any android tv box purchased from any retailer.

*We will also provide the suitable IR Remote control for free with the service (please leave a note @ the checkout).

Terms of Use: Firmware images need to be flashed onto your device via USB/PC. Do so at your own risk. Flashing the wrong image, or flashing the correct image in an incorrect manner can cause your device to “brick”. We only recommend experienced users to perform firmware upgrades. We take no responsibility and provide the firmware files ‘as is’ without warranty. We do not provide flashing upgrade support or troubleshooting for DIY users > we do however provide a service to do it for you.

*Credit goes to SuperCeleron from Freaktab for making this firmware ROM update possible.

21/04/2018Download QBOX S905 AP6330 Lollipop 5.1.1 img
QBox Android Lollipop 5.1.1 (DROIDWORLD Q-TV) S905 RTL8723This QBOX firmware will work on any Amlogic QBOX S905 with RTL8723 WiFi Chip. (RealTek RTL8723 Single Band).

The original firmware had terrible bad WiFi – this firmware will give you super fast & reliable WiFi with excellent reception/signal.

Build ID: p207 / LMY47V / RTL8723

NOTE: There are 3 variants of the QBOX S905 (this firmware is for the one with RTL8723 WiFi chip. If you flash this firmware on a different variant, the WiFi / BT will not work).

NOTE: This is for QBOX S905 , and NOT S905X. The new QBOX’s are sold with the lower cost S905X CPU, this firmware is for the original QBOX with the S905 CPU.

NOTE: Since the QBOX was sold with different remote controls, your original IR based remote control may not work with this firmware. Although you can use any aftermarket wireless android remote control on this device.

Disclaimer: Modification or re-distribution of this image without authorization from DROIDWORLD is prohibited.

Service: If you own this device and wish to upgrade its firmware, but do not know how to do so – please note that we do offer services for upgrading firmware/refurbishment of any android tv box purchased from any retailer.

*We will also provide the suitable IR Remote control for free with the service (please leave a note @ the checkout).

Terms of Use: Firmware images need to be flashed onto your device via USB/PC. Do so at your own risk. Flashing the wrong image, or flashing the correct image in an incorrect manner can cause your device to “brick”. We only recommend experienced users to perform firmware upgrades. We take no responsibility and provide the firmware files ‘as is’ without warranty. We do not provide flashing upgrade support or troubleshooting for DIY users > we do however provide a service to do it for you.

21/04/2018Download QBOX S905 RTL8723 Lollipop 5.1.1 img
QBox Android Lollipop 5.1.1 (DROIDWORLD Q-TV) S905 16GB BCM4335This QBOX firmware will work on any Amlogic QBOX S905 with BCM4335 WiFi Chip. (Broadcomm BCM4335 Dual Band 5G).

Build ID: p200_2G / QB0006 / BCM4335

NOTE: There are 3 variants of the QBOX S905 (this firmware is for the one with BCM4335 WiFi chip. If you flash this firmware on a different variant, the WiFi / BT will not work).

NOTE: This is for QBOX S905 , and NOT S905X. The new QBOX’s are sold with the lower cost S905X CPU, this firmware is for the original QBOX with the S905 CPU.

NOTE: Since the QBOX was sold with different remote controls, your original IR based remote control may not work with this firmware. Although you can use any aftermarket wireless android remote control on this device.

Disclaimer: Modification or re-distribution of this image without authorization from DROIDWORLD is prohibited.

Service: If you own this device and wish to upgrade its firmware, but do not know how to do so – please note that we do offer services for upgrading firmware/refurbishment of any android tv box purchased from any retailer.

*We will also provide the suitable IR Remote control for free with the service (please leave a note @ the checkout).

Terms of Use: Firmware images need to be flashed onto your device via USB/PC. Do so at your own risk. Flashing the wrong image, or flashing the correct image in an incorrect manner can cause your device to “brick”. We only recommend experienced users to perform firmware upgrades. We take no responsibility and provide the firmware files ‘as is’ without warranty. We do not provide flashing upgrade support or troubleshooting for DIY users > we do however provide a service to do it for you.

21/04/2018Download QBOX S905 BCM4335 Lollipop 5.1.1 img
MINI M8S II S905X Android Marshmallow 6.0.1MINI M8S II S905X Firmware Update.

The original firmware had terrible bad WiFi – this firmware will give you super fast & reliable WiFi with excellent reception/signal.

Build ID: p212 / MHC19J / D4X16

NOTE: There are 2 variants of the MINI M8S II S905X (this firmware is for the newer revision green PCBA printed D4X16).

Disclaimer: Modification or re-distribution of this image without authorization from DROIDWORLD is prohibited.

Service: If you own this device and wish to upgrade its firmware, but do not know how to do so – please note that we do offer services for upgrading firmware/refurbishment of any android tv box purchased from any retailer.

Terms of Use: Firmware images need to be flashed onto your device via USB/PC. Do so at your own risk. Flashing the wrong image, or flashing the correct image in an incorrect manner can cause your device to “brick”. We only recommend experienced users to perform firmware upgrades. We take no responsibility and provide the firmware files ‘as is’ without warranty. We do not provide flashing upgrade support or troubleshooting for DIY users > we do however provide a service to do it for you.

*Credit goes to Beelink for making this firmware ROM update possible.

21/04/2018Download MINI M8S II S905X Marshmallow 6.0.1 img